Corrosion X for Guns Corrosion Inhibitor | CorrosionX
Regular price $7.65
NAMED "BEST ALL-AROUND" FOR MAINTAINING FIREARMS AND IMPROVING THEIR PERFORMANCE
CorrosionX for Guns
Cuts through stubborn bore deposits for easier, more thorough cleaning
Decreases fouling, even after hundreds – or thousands – of rounds
Lubricates and protects mechanisms and bores even better and longer than products fortified with PTFE
Ideal for semiautomatics and automatics
Sticks to metal like a magnet to prevent rust ... even in the rain
Unmatched Cleaning, Lubrication and Protection from Rust and Corrosion for pistols, rifles, shotguns, skeet, sporting clays, concealed carry, hunters, law enforcement, military, special forces and police applications. Extreme performance and protection to stand up to the most demanding extreme shooting environments.
CorrosionX for Guns comes in a 4 fl oz (118 ml) plastic bottle, with an applicator tip that's ideal for firearms. It's easier than ever to apply the product, and get maximum protection and performance.
"CorrosionX worked longer and better than anything I've used before."
– Dick Metcalf, Shooting Times magazine lubrication test"I sometimes think there are more different kinds of firearms lubes and rust-prevention compounds on the market these days than there are guns. However, I have recently become a believer in one particular item and have begun using it exclusively. The product is CorrosionX. As a corrosion inhibitor, CorrosionX polar bonds to metal (water beads on it like car wax), prevents rust from starting even with extended exposure to rain, and withstands extreme handling abuse. It repels moisture with the thinnest of coats.
I've rubbed hard with a salt-sweaty thumb on a barrel wiped down with CorrosionX and moisture still beads. And its polar-bonding effect works to prevent existing rust from progressing – spray it on a gun where rust specks have already begun, and it'll stop it cold.
As a lubricant, CorrosionX offers a lower coefficient of friction than even PTFE-fortified products. Plus, since it's specifically designed for high-temperature(s), it doesn't burn off or sublimate away during hot-action use.
I recently used it to lube the yoke/crane cylinder-rotation shafts of two .357 Magnum revolvers during a 10,000-round endurance review, where 500-round strings were standard. CorrosionX worked longer and better than anything I've used before. The cylinder/yoke areas would get too hot to touch, but the lube did not dry up and was visibly still "moist" when I pulled off the cylinder. As a penetrating agent, CorrosionX is remarkable. The manufacturer reports incidents where its application has freed the frozen actions of guns that have laid for weeks in the soaking ruins of building fires. That's pretty extreme!"